« Back
Magnetic sensor MSK400/1

Magnetic sensor MSK400/1

PRODUCENT CODE: -
CATEGORY: Incremental Linear Encoders | MagLine
Producer: SIKO GmbH
The product is available on request
At the moment, the product is not available in our warehouse.
After placing the order, we will notify you of the expected delivery date of the product.
Fast shipping
Free delivery
from 1000 PLN (net)
Do you have questions about the product?
Ask an experienced consultant:
+48 694 467 159
rw@newtech.com.pl
Description
  • Max. resolution 1 mm
  • Repeat accuracy ±1 increment
  • Works with magnetic tape MB400
  • Reading distance ≤4 mm
Technical data
Mechanical data
Housing white plastic
Sensor/band reading distance 0.1 … 4 mm
Cable sheath PUR, suitable for drag-chain use (4-core ø 4.8-0.4 mm)
Cable bending radius 5x cable diameter (static)
7.5x cable diameter (dynamic)
Service life of cable >5 Million cycles (Under the following test conditions:)
Electrical data
Operating voltage 24 V DC ±20 % (reverse polarity protection)
Current consumption < 20 mA (unloaded)
Output circuit PP
Output signals A, B (90° off-phase)
Output signal level high >UB - 3.5 V
Output signal level low < 2 V
Latency 1.5 µs
Real-time requirement speed-proportional signal output
Type of connection open cable end
plug connector (7-pole)
System data
Resolution 1 mm (with quadruple evaluation)
System accuracy ±(1 + 0.03 x L) mm, L in m at TU = 20° C
Repeat accuracy ±1 mm
Measuring range ∞
Travel speed ≤10 m/s
Ambient conditions
Ambient temperature -10 … 70 °C
Storage temperature -30 … 80 °C
Relative humidity 100 % (condensation admissible)
EMC EN 61000-6-2 (interference resistance / immission)
EN 61000-6-4 (emitted interference / emission)
Protection category IP67 (EN 60529)
Shock resistance 500 m/s2, 11 ms (EN 60068-2-27)
Vibration resistance <100 m/s2, 5 … 150 Hz (EN 60068-2-6)