| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range |
| -0.125...2.5 bar | -125...2500 mbar | -1.8...36.25 psi | -12.5...250 kPa |
|
| Process connection |
threaded connection G 1/4 internal thread |
| Special feature |
Gold-plated contacts |
| Measuring element |
ceramic-capacitive pressure measuring cell |
| Application |
for industrial applications |
| Media |
liquids and gases |
| Medium temperature |
-25...80 |
| Min. bursting pressure |
|
| Pressure rating |
|
| Vacuum resistance |
|
| Type of pressure |
relative pressure |
| Operating voltage |
18...30 DC; (to SELV/PELV) |
| Current consumption |
< 35 |
| Min. insulation resistance |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time |
0.3 |
| Integrated watchdog |
yes |
| Number of inputs and outputs |
Number of digital outputs: 2; Number of analogue outputs: 1 |
| Total number of outputs |
2 |
| Output signal |
switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC |
2 |
| Permanent current rating of switching output DC |
250 |
| Switching frequency DC |
< 500 |
| Number of analogue outputs |
1 |
| Analogue current output |
4...20; (scalable 1:5) |
| Max. load |
500 |
| Analogue voltage output |
0...10; (scalable 1:5) |
| Min. load resistance |
2000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
pulsed |
| Overload protection |
yes |
| Measuring range |
| -0.125...2.5 bar | -125...2500 mbar | -1.8...36.25 psi | -12.5...250 kPa |
|
| Analogue start point |
| -0.125...2 bar | -1.8...29 psi | -12.5...200 kPa |
|
| Analogue end point |
| 0.375...2.5 bar | 5.45...36.25 psi | 37.5...250 kPa |
|
| Factory setting / CMPT = 2 |
|
| Set point SP |
| -0.11...2.5 bar | -1.6...36.25 psi | -11...250 kPa |
|
| Reset point rP |
| -0.12...2.49 bar | -1.75...36.1 psi | -12...249 kPa |
|
| Min. difference between SP and rP |
|
| In steps of |
|
| Status_B High Resolution / CMPT = 3 |
|
| Set point SP |
| -0.109...2.5 bar | -1.58...36.25 psi | -10.9...250 kPa |
|
| Reset point rP |
| -0.12...2.49 bar | -1.73...36.11 psi | -12...249 kPa |
|
| Min. difference between SP and rP |
|
| In steps of |
|
| Switch point accuracy |
< ± 0,4; (Turn down 1:1) |
| Repeatability |
< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation |
< ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation |
< ± 0,1; (Turn down 1:1) |
| Long-term stability |
< ± 0,05; (Turn down 1:1; per 6 months) |
| Temperature coefficient zero point |
0,2; (-25...80 °C) |
| Temperature coefficient span |
0,2; (-25...80 °C) |
| Notes on the accuracy / deviation |
switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1% |
| Response time |
< 1.5 |
| Delay time programmable dS, dr |
0...50 |
| Damping process value dAP |
0...4 |
| Damping for the analogue output dAA |
0...4 |
| Max. response time analogue output |
3 |
| Parameter setting options |
hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| SIO mode |
yes |
| Required master port type |
A; (when pin 2 not connected: B) |
| Supported DeviceIDs |
| Type of operation | DeviceID | | Factory setting / CMPT = 2 | 464 | | Status_B High Resolution / CMPT = 3 | 975 |
|
| Note |
| For further information please see the IODD PDF file under "Downloads" |
|
| Factory setting / CMPT = 2 |
|
| Profiles |
| Function | Process data variable | | Function | Device identification | | Function | Device diagnosis |
|
| Min. process cycle time |
2.3 |
| IO-Link resolution pressure |
0.005 |
| IO-Link process data (cyclical) |
| function | bit length | | pressure | 14 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) |
application specific tag |
| Status_B High Resolution / CMPT = 3 |
|
| Profiles |
| Smart Sensor - SSP 3.1 | Measuring Sensor | | Common - I&D | Identification and Diagnosis |
|
| Min. process cycle time |
3 |
| IO-Link resolution pressure |
0.001 |
| IO-Link process data (cyclical) |
| function | bit length | | pressure | 16 | | device status | 4 | | binary switching information | 2 |
|
| Ambient temperature |
-25...80 |
| Storage temperature |
-40...100 |
| Protection |
IP 65; IP 67 |
| EMC |
| DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
| MTTF |
171 |
| UL approval |
|
| Pressure Equipment Directive |
Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight |
235.5 |
| Housing |
cylindrical |
| Dimensions |
Ø 34 / L = 90.7 |
| Materials |
stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) |
stainless steel (316L/1.4404); Al2O3 (99.9%; ceramics); EPDM |
| Min. pressure cycles |
100 million |
| Tightening torque |
25...35; (recommended tightening torque; depends on lubrication, seal and pressure rating) |
| Process connection |
threaded connection G 1/4 internal thread |
| Restrictor element integrated |
no (can be retrofitted) |
| Display |
| Display unit | 3 x LED, green (bar, psi, kPa) | | switching status | 2 x LED, yellow | | measured values | alphanumeric display, red/green 4-digit |
|
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |
